Knowledge of the torsion NEXIQ 125032 beam suspension

Strict sense, the suspension is only divided into NEXIQ 125032 non-independent and independent trailing arm torsion beam is naturally placed under the category of non-independent suspension, but some of its features different from widely used in trucks, hardcore performance car, SUV, and a small part of the overall axle independent suspension, torsion beam suspension are usually preceded by another title - semi-independent suspension.
Between the independent suspension trailing arm torsion beam suspension has been able to in the name of "semi-independent suspension between the multi-link and other forms of non-independent suspension, at its unique structure determined: it simply vertical arm torsion beam suspension of the torsion arm and a torsional deformation in a certain extent by the two longitudinal beams composed, springs and shock absorbers are generally disposed at the rear end of the longitudinal arm near the position of the wheel chock.
Non-independent suspension with no  Renault CAN Clip  relative movement between the two wheels is different, due to the torsion beam itself has a certain amount of torsional deformation, thus allowing the two wheels to bounce up and down without interference to the other side of the wheel in a small range, respectively. From this point of view, it is called a semi-independent suspension is also some reason.
Can be seen, only provides a first suspension to the vehicle body longitudinal axis, and by two parallel longitudinal force longitudinal arm and is located in the wheel near the axis of beams, also needs a lateral stop plunger transversely to the suspension positioning. The position of the second suspension beam closer to the connection point with the body, and the two longitudinal arms and the connection point of the vehicle body there is a certain angle.
Based on these two different torsion beam suspension can be seen that the position of the beam is different between the two longitudinal arms. Simply speaking, the beams near the connection point of the body the the suspension characteristics manifested mainly in a comfortable, and very close to the single longitudinal arm torsion bar spring suspension characteristics (models Elysee, Beverly rear suspension).
Beams is disposed in the middle of the longitudinal arm, primarily manifested inhibit the roll as well as a certain degree of control performance; beams close to the wheel center, or coincident with the wheel axis, manifested characteristics are dominated by sexual and bearer, it is also more close to the overall design of the  vas 5054a bridge suspension. Of course, the final suspension characteristics also integrated the adjustment all aspects of the suspension system.

Automotive air conditioning function / Mistakes

The air conditioning is divided into three categories: manual, semi-automatic and fully automatic. Models in general more than 150,000 yuan basically able to find a table in the configuration automatic air conditioning this one, today is not what luxury configuration.

Manual air conditioning: the amount of wind, the wind patterns and temperature are manually adjusted. This air conditioner suitable for mechanical plot friends, the advantages do not have to think about brainer, familiar with do not have to look down at the seat of your pants, you can adjust all want to adjust, but the biggest drawbacks is that any time need to manually adjust it.

Semiautomatic C: The amount of wind, the wind mode manually adjusted, while the temperature is manually fixed value, according to the sensor to the change in temperature, is controlled by the computer to maintain a constant temperature. To put it plainly, is set a temperature, the compressor can maintain a constant temperature. Intermittent work. This range between automatic and manual air conditioning in terms of functionality, more than 10 million family cars.

Automatic air conditioning: all are automatically adjust the amount of wind, out of the wind patterns, temperature, etc.. If you manually set temperature, then all the other according to the set temperature automatically adjusted. In general, the majority of the top models equipped models will this configuration into the configuration table, it has to be the default for the Deluxe Edition comes standard.

No matter what form of air conditioning, there will be several commonly used function keys. If you do not know their function or can not remember when this, in this study, the air conditioning to better serve you.

The wind direction adjustment button: wind direction adjustment. Automatic air conditioning, wind direction adjustment button design more humane, the very image of a lot of models of wind direction adjustment button design, head, upper body and feet were three buttons, intuitive and easy to use. However, most models Winds still are conventional, rely on one of the buttons for switching, generally labeled as the "MODE". Manual air conditioning is generally the knob.

 http://elm327demi.blogspot.com/

The paint routine maintenance and obd2 touch-up painting Detailed

Automotive paints are generally baked paint. Depot  obd2  inside the frame, the car shell welding is completed (and sometimes hand-patched), the next process is painting. In general, the first (high-end car first using phosphated anti-corrosion technology) primer. Light car shell immersed in syrup-like paint tank, remove the drying primer; then fed into a dust-free workshop, spray on the top coat with electrostatic painting process. And then dried with a temperature of about 200 degrees. Elegant point, there will be another layer of varnish. In this way, the paint process and you're done. General topcoat the several: Pu Tongqi; metal paint; pearlescent paint. Pu Tongqi Needless to say, resin, pigments and additives. Metallic paint more aluminum powder; future looks bright so complete. The pearlescent paint it, adding cloud masterbatch. Mica is a thin piece of something, reflective directional, there will be a colorful effect. Metallic paint and varnish layers, the car's paint looks very bright, very beautiful. Color, white is undoubtedly the cheapest. For example, a world-class brand red pigment is probably more expensive than the world-class brand titanium dioxide 25 times; while the amount of titanium dioxide white paint is about five times the red pigment. Therefore, the cost of red paint color than white paint five times. This is why some domestic cars color varieties so little: a simple, low cost.
No matter what the color of the paint, the pigment will fade in sun. In fact, not only the paint, any color stuff in the sun may fade. In this case, how the paint inside plus additives is very important. Such as light stabilizers, such as antioxidants. Unfortunately, the good additives expensive expensive. In many cases, additives This   obd2 tool  paint gives the feeling of how good or bad decision. One would certainly think that some sort of two years, began to appear significantly fade the paint than five years, bright as new paint. But in fact, the paint does not fade. Many times, the factory is more concern: fade evenly. Try not to make the different parts of the car color difference.
The new car arrived, is to paint the most easily damaged. The car wash is not careful, the paint will be injured. In fact, even to hold things in the production line, when there are things to damage the paint.
Generally small scratches, paint surface has scars, scars whitened. That is painted surfaces shaving. There is no necessary touch-up painting. Light, playing with sand wax or multi-hit several times wax. Weight, to be a polished it can be had. Serious, able to see the color of the underlying primer (in many cases, the primer is a dark color). So, Please take another look at the site of the scar. Generally, bumpers, mirrors and some car wheel eyebrow these parts, engineering plastics. Will not rust. Actually, I have a big   Renault CAN Clip  problem addition unsightly. Fill up painting they do not matter. Other (torture), it would have to touch-up painting, otherwise, even if it is a small breakage, steel will start to rust that time, even up painting it is difficult anti-embroidered.

Clear car ADS-1S Scanner smell to make you more comfortable

Spring rampant bacteria, so the car's ventilation  ADS-1S Scanner   system is very important because it can directly affect the quality of the air inside the vehicle. Performance of air conditioning can make the interior air fresh and healthy, and to provide you with a comfortable driving environment. For example, some car equipped with a six outlet can be adjusted independently, so that open automobile air conditioning, ventilation inside the car can enter a steady stream of fresh air to the car.

If you want to detect air circulation speed of the car, you can do a little experiment: lit cigarettes in enclosed compartments, two minutes later, the car was filled with thick smoke. The air circulation system in this case, start the car in less than 30 seconds, the car has to see less than a smoke trail, then you can explain the excellent air circulation speed of the car.

Should use a dedicated car wash car wash liquid the prolonged use detergent or soap will cause the paint to lose their luster, but also   ADS-1S  serious corrosion paint. Car wash with cleaning fluid, clean water and then the car from start to finish flush again, in order to wash away the stains. Try not to bright light exposure and hot car car wash, this could easily lead paint off.

In addition to clean the body, but also pay attention to the clean car interiors. With a towel or sponge dipped in soapy water or cleaning agent, scrub every corner of the dashboard. Before cleaning chemical fiber surface with a vacuum cleaner dust siphoning, and special textile cleaning agent infiltration few minutes, until the dust dissolved cleaned, and then a towel.

If there is no special cleaning agent is interchangeable with soap or dishwashing liquid. Leather products can be used towel stained with a little water to scrub, note the careful use leather protection products, the poor protection products not only can not play a protective role, but will also damage the leather. The chrome-plated surface should always scrub to maintain its light levels, when found chrome surface   gm tech2 Candi has been scratched, should be promptly sealed to prevent corrosion continue to expand. We recommend that you purchase a car vacuum cleaner so that timely removal of dust and microorganisms of the car.

Exterior of different vehicle and modifying lexia 3 internal

The pursuit of modification of young of the  lexia 3  personality of the car is particularly strong. And the public have not the appearance of the car looks the same on the road, while highlighting their personal preferences to add a beautiful style. If only the surface is vulgar, we must be "content", while the modified appearance may also wish inside the change to avoid the time in the car more than the time of contact with the surface of the vehicle.
 aspect of personalityThe appearance of the car is the key to attract the eye, authentic models originally designed for vehicles on the road, a personality change models appear in front of you shining? Usually more common before the conversion after the great eThe taillight tail blackened also changes necessary for the project, in addition to the conversion factors, staff believes that the best contribution to the reduction of brightness, perhaps you find this incredible, now the car is equipped with LED tail lights usually start, the red LED brake when the light is very high, a significant impact on the car suivante.ntourée. Do not think that the foundation headquarters extensive knowledge surrounded by large, can reduce driving return air to increase support to make the car more stable lead up to a certain point, at the same time reducing fuel consumption .
Surrounded by a change large car, the wheels light is particularly important. Paragraph Reiz using SYTLUZ R & D hub, the wheel has a lightweight and  Autocom Cdp Pro For Trucks   shock resistant and low rolling resistance, the operational advantages sensitive. Choose a suitable tire on the basis of hub can play a sensitive operation, strong adhesion, began quick results

Drift rules of Renault CAN Clip do you understand?

Officially entered China from the game de2006 drift far six years, Renault CAN Clip  has become an important part of the car racing essential Chinese driver drift team drift time and the number of followers climbing drift We can say drift motion in China has become the scale. However, I have experienced many events on the ground drift found the reason why people enjoy watching drift away to be able to see the race drift cool, greater attention is given by the drift the atmosphere and place, and can really see but very few people understand dérive.M Thurs. He Tao WDS referee Drift Championship D1 GP drift was contact sport riders began in 1999, and in 2003 founded the American Institute California drift (NCDA), the drift of the Chinese considered the first to play L 'Mr. Tao He will tell you how to understand the game derived from the rules of competition drift explain. Drift competition was divided into two categories: qualifying and PK tournament qualification is often said that once, PK tournament is the most exciting car chase go through the qualifying score to decide season qualify for PK, PK tournament victory of players you can successfully enter the next round. According to the rules of the game and scoring only to hunt he said.Single-go (only sent a car for most artists):Riders need the fastest to finish the race;2. Riders in the corners as possible to the front  Auto Diagnostic Tool  or rear corners near the heart or peripheral, so that you can get extra points;3. In the process of drift, the angle of rotation of the body is the best, most consistent, the better; Chase go (the car double towers of departure):Double car chase walk off the starting system can not exceed the vehicle in front and after the car in the precise timing of the position on the grid changes after one end of the party;2 racers can be carried out in accordance with the form at once to finish the game, much better after the car, you can get favorability of the arbitrator;After the racers will do everything possible to ensure the shortest distance from the vehicle that the vehicle ahead mimic drift car route and point of view, if you were able to close the vehicle in front and action is compatible with, and even be able to estimate the vehicle in front of the action, you can get the referee is good sensitivity, if misconduct accident exceeded;Another way may also order the car to both the referee after the favorability of the process drift car more perfect than the previous routes drift car and be able to close the vehicle in front;5 before the car can also use some of the Volvo VIDA DiCE tips to make the car difficult to close as lines suddenly accelerated around corners quickly set the pace car is stripped of old car after the killer

New Shengda contrast Outlander obd2 scanner

The appearance of the two vehicles are more successful obd2 scanner design, the new Outlander obvious some conservative brand new Shengda unassuming, gives the appearance of body fluid dynamic pull the wind exponential. And broader audience. New Outlander conservative based on certain breakthrough, the front face shape and headlights have been newly designed, stable without losing the taste of the concept car.

New Shengda wheelbase is greater than the new Outlander, but the Outlander later spatial experience superior new Shengda may be differences in seat design. Some other mainstream body of the configuration of the new Outlander somewhat lacking, not simply with the hope that after the domestic worse. Dynamic contrast: the new Shengda 3.0L power output was significantly higher than the new Outlander 2.4L displacement, but the new Outlander should have good performance in fuel consumption.

 Both engines also each have their own advantages, if you want to have an advantage in the power, you can choose the brand new Shengda. In contrast the new Outlander fuel consumption should   lexia 3 have a good performance. New Shengda with the 6-speed tiptronic change, the new Outlander is equipped with a continuously variable transmission CVT shift paddles analog 6-speed manual mode, and also give a little bit fun to drive.

The interior style tends to be the same both directions. The new Outlander prefer sedate, select it more middle-aged people are more. The interior design of the new Shengda even more young and lively crowd broader audience. Mitsubishi should really be in the interior design some effort, and not just stick to conventions, this will only farther and farther away from the bright road.

New Shengda security configuration also higher than the apparent new Outlander, Outlander will be able to advantage, 2.4L engine with the the ECO fuel saving mode should be on the fuel consumption of less than the new Shengda 3.0 engine, although brand new Shengda  eobd2   is also equipped with the ECO fuel saving mode. However, power output, the new Outlander is no advantage.