Windshield icing prevention renault can clip methods

Early winter, temperatures often hovering at 0  renault can clip  degrees Celsius, this time in the form of sleet precipitation often occur, which gives the driver a lot of trouble, especially in the morning to the windshield deicer. 5, the reporter from an organ professional driver Ma Department learned that the correct way is to wait for the engine temperature reaches a certain temperature hot air will blow the ice on the windshield of the.

"Winter driving, we will open the heater temperature to enhance the car and we got off, the car is still in a period of time to maintain a high temperature, if this rain or snow, the snow on the original glass will fall because car inside and outside temperature inconsistencies melts ice. "Ma said, the next day driving need to put snow on the glass dropping, and then clean up the most vexing most anxious layer of ice. The best way is to start the car when the engine water temperature rises, with warm breezes windshield until the ice melted. However, this method also has some drawbacks, is time-consuming, laborious, expensive oil.

Avoid freezing windshield, Ma shared their tips. "In the first day lock your car before you open the door vent, try to make the  KFZ-OBD Diagnose Scanner car the same as the outdoor temperature drops, followed by a newspaper or cloth covering the windshield, and then the door grip to avoid being blown away, this fall car snow on the window will not be melted and then frozen.

It is understood that, due to the snowfall did not expect that many owners will find that the next morning, wipers have been frozen in the windshield. If the ice melts before the start scraping snow wiper, wiper drive motor may therefore burned. Avoid such losses are only two ways, one after the other in the use of wipers melting snow, the other is in the locked car will lift the front windshield wiper.

In addition, since the vehicle parked in the outdoor night will gradually flow to the sump oil, so in a hot car, the oil does not immediately transported through the oil pump to the engine piston lubrication is most needed, so the engine is pre- Heat is necessary. Allow the engine to warm up before winter travel about 1 minute, you can play the  Auto OBDII Codeleser  role of engine lubrication. At this time the engine temperature is not high, if the heating time on, to achieve the desired temperature, the air-conditioning system tends to intervene automatically and cause an increase in fuel consumption.