Intercooler
turbo car into a necessity for air cooling VAS 5054A turbine compression, the
engine does not knock and issues such as the intake air temperature is
too high. Theoretically
enters the cylinder temperature of the air is lower, the higher the
density of the oxygen molecules, and the lower temperature of the
compressed gas, and more conducive to the enhancement of the horsepower,
turbo vehicles would be reduced in the cold, the air temperature.
Cooled internal general build from aluminum or cast iron, aluminum alloy intercooler was more popular. One
hand aluminum compared to the average weight of cast iron products have
great advantages compared to other materials block the other hand, the
thermal conductivity of aluminum speed. Quickly
into the turbine air temperature rose rapidly, so that the decrease in
the density of oxygen molecules affect performance can lead to engine
overheating if inhaled engine. Aluminum
in the cold after the intervention, the hot air will quickly conduct
heat and cold both inside and outside the walls of the windward side
will quickly reduce the temperature, increase engine promote combustion
after the inhalation of air containing oxygen density.
Intercooler
cooling performance level, depending on the efficiency of the process
air passes through the Intercooler heat transfer out. Which mb star c3
Intercooler frontal area, thickness, air passage number of rows, the
density of the cooling fins, etc., plays a decisive role. Internal
air can accommodate the amount of places (in the thickness of the
intercooler intercooler in the x width x single-line height x number of
rows, and also take into account the thickness of the material in
cooler) way.
For
turbine engines, the pressure relief valve is very necessary
components, the pressure relief valve is actually a protective device,
can play a role to protect the engine and turbine. When
the speed increases, the exhaust gas to promote the rotation of the
turbine blades, the turbine will be a steady stream of compressed air
for the engine supply. Then
if a throttle, throttle immediately shut down, but the turbine
continues to rotate due to inertial motion, means that the turbine will
continue to produce compressed air. Like
the GT-R, this high pressurized high-powered cars, fast air velocity
pressure is too large, it is easy to cause damage of the throttle. Intake pressure relief valve on the throttle to play a role in protection. Close
elm 327 the throttle of the moment, the increase in pressure within the intake
pipe pressure relief valve to open the top of the valve directly at the
pressure relief valve to drain away the excess air, and so will be able
to reduce the damage suffered by the throttle.
没有评论:
发表评论